A common query online is how to convert negatives to digital using Photoshop. And that’s why today we are going to show you a very crucial thing about saving old memories. By that I mean, converting those old negatives into digital photos. Before inventing digital cameras there were a large number of capturing devices that needed films to perform. You may have some of them stored safely in case you need them for some days. Well, this is your chance to convert negatives to digital format at home. If you cannot do that, there are companies providing graphics solutions. And, not only that this is time-saving, labor-saving and you can do it by yourself. We will try to clarify the matter at the most possible. Nothing is as easy as this job to make the digital image format with convenience.
The Capturing Process (Convert Negatives to digital)
Converting process begins with the capturing of the negatives and it’s pretty simple. Put the negative in front of the plain bright light and take a snap with your camera. Specialists say that macro lenses are good to capture such negatives. Printers that scan negatives and slides are good for the process as well. You need to maintain three important things to capture a negative image better for further processing. They are;
- The Quality of the Film
- The Lens To Capture the Image of the Negative
The Quality of the Film (Convert Negatives to digital)
Obviously, you need the film quality better or at least ‘satisfactory’. Why is that? Because, if you capture a negative with low quality or damage, you may have to work more. Also, you may not get satisfactory results. However, there are some situations that we may face when the quality is less important than memory. For that, you need to convert negatives to digital service by demand.
The Lens To Capture the Image of the Negative
You need to use a high-quality camera for sure. The lens is another prime requirement of capturing the negatives. Better to use a macro lens because it has the ability to capture small subjects from a short distance. If you want your negative to capture in high resolution with more details this is the lens you must use. However, if you do not have the kind of lens, you can use other cameras as well. Make sure the captured image is clear and large in size.
In order to capture a subject properly, it is very important to take care of the lighting. Different kinds of subjects ask for different types of lighting for the theme. Negatives we are handling requires lighting from the back part of it. Any other lighting is not important. In fact, no lighting except the one from the back brings a better result. You can use the ‘Light Board’ or ‘Light Box’ for the purpose. Best if the room is dark without any other light. You can use the negative scanner to skip this process but I do not suggest that for quality output. A negative scanner is also costly and less available today.
The Editing Process (Convert Negatives to digital)
As we are working with the negatives it is not mandatory to edit the edges of the image or negative border. So, we will crop the image only the section we need. The ‘Crop Tool’ is in the lools column on the left side of Photoshop. If you cannot see the ‘Tools’ panel, go to the tab ‘Window’ and click on Tools.
Editing (Convert Negatives to digital)
To go through the editing process first you need to make the negative into positive. Go to the button ‘Create new fill or adjustment layer’ and select invert.
‘Invert’ layer converts negative into positive. You can have a nearly real view of the negative now. Fortunately, we have used the cleanest negative with fewer impurities.
The image is already looking much better. Brings out the natural look of the real scenario. But still, you may see some of the impurities that should not be. Here we will try to fix the tone. The selected scenario represents foggy woods and rail lines with a human being. We will use the ‘Curves Adjustment Layer’ and use an automatic color correction process. If you want to learn more about the process follow the blog “Photoshop Automatic Color Correction in CS6”.
The image looks much better already. You can adjust the curves level from the graph or you can move the sliders a bit according to your will. However, you may not need to do so if the result is already satisfactory. I am changing the variables a little bit though. Also, you can move the lines on the graph if you want.
Adjusting the variables brings better sharpness with details. As the image contains fog, we do not need to make it crystal clear. In fact, making the image crystal clear may ruin the natural exposure. You may also use the ‘Color Balance Adjustment Layer’ that allows you for further editing. I am just showing the option a little bit but may not important for this image.
I have changed the levels a little, increase the Yellow which is the opposite of Blue. Also, I have increased the Cyan a little which is the opposite of Red.
I believe the image looks good enough now. Any more changes are not necessary according to my opinion. So I am stopping at the position. The final image is as below.
You can save the image according to your needs. The most convenient one is saving in ‘PSD’. Why is that? Because it gives you the liberty to edit or modify the image anytime you want. Moreover, the process is totally non-destructive. So, you can go back to the original image or change any settings anytime you want. However, there are other formats that you can save the image with. They are JPG, PNG, Tiff, BMP, etc. but they do not maintain all the editing history in them. On the other hand, these formats take less space than the ‘PSD’and you can use them on the web.
Punch Line: Non-destructive negative to positive editing procedure
Where to develop the film from a disposable camera? Today it has become an issue to think of as most of the labs are now handle soft copies. Also, negative to positive without printing from the lab is a fun way. You can do it by experimenting with the old negatives to develop your skills. It may save time but if you do not have good shooting gear, the process is expensive. You need to buy a camera with a macro lens which is far more expensive than printing from the lab. Prints from negatives are a low-cost option for that. However, if you can get the idea well, you can do better without high-quality cameras.
What is Negative to Positive literally?
Ans: Negative to Positive is a conversion by which we get a printed image from a negative. Cameras of previous technology used films to capture the moments. Then the films needed to process for further use.
How effective is the conversion?
Ans: The conversion is very effective if you can manage every step properly. Some negatives are old enough and defective. But the memories are priceless. With the conversion, you can bring back priceless memories.
What if we convert the negatives with the ‘Invert’ layer only?
Ans: If you invert the negatives only with the ‘Invert Adjustment Layer’ only, you may not get the best result. It is good to have the idea of natural-looking images and push forward to that.
What is the necessity of negative to positive conversion in Photoshop?
Ans: The conversion in Photoshop is important if you think it is. You can easily print the photographs from some lab in exchange for a little money. But if you want the photographs perfect as you want, it is really necessary. You are the designer of your precious memories. You know better how to focus them.
Does the labor worth of conversion from negative to positive?
Ans: If you believe in good output better than the negative can provide, it worth every bit. However, you can work on printed images if you want. That will do the same except for the invert option.