Photoshop Action Panel and its use is a very simple but effective process. So, what is Photoshop Action? According to Adobe corporation, “An action is a series of tasks that you playback on a single file or a batch of files—menu commands, panel options, tool actions, and so on”. So, Photoshop Action is a feature by the Photoshop program that includes some editing steps. And, you can apply on any image with just a click”.
Photoshop Action creation and implementation are convenient for image editing. But, you need to understand some matters in order to have a successful set of actions. Creating an action should be smart so that it does not fail to give you satisfactory results. For good action, you need to focus on two prime properties. They are;
The Versatility of Action allows you to apply the action in most of the images. Well, it is not possible to use the same action for all the images. So, Versatility refers to the maximum types of images to apply. The other one is Customizable property. The action will allow you to change or modify any value during the action and even later. We will try to give a clear concept in this tutorial.
Not all post processing services contain the same attributes. This is quite different from other image editing tasks. To create action in photoshop, you need to open the ‘Actions’ window. If you see it already visible in the Photoshop program, that is good. But, if you do not see it yet, go to Window>Actions and click on that. However, there is another way to open the Photoshop actions panel. Use shortcut Alt+F9 for Win or Option+F9 for MAC to show or hide the window. I am using an 8bit image for this action creation. We have already created a new action folder named CW Actions. You can create a new action set from the tagged 1 icon as below image.
To create a new action, click on the icon marked 2. A new window will open named ‘New Action’. Type the name you want to set for the action and click ‘Record’. Photoshop Action is a bit similar to a tape recorder. The difference is, tape recorder keeps recording until you pause or stop it. On the other hand, Photoshop action will record only the activities you do. It does not matter how much time you use for a step.
We will give you two examples in this blog. Well, the ways we are about to discuss here are tests only. You can use them if you want. But, it would be better if you learn the procedure and create your own for implementation.
Example 1 (Photoshop Action Creation)
Copy the Background layer (Photoshop Action Creation)
We are working on the ‘Test 1’ action creation. The recording is running and we are about to start the activity. First, we duplicate the layer and hide the background layer. Well, this is safe for photo editing. Say, you are working on the background layer. And, in the middle of the work you realize that the retouching you have done was not appropriate. In this situation, you need to start over again. But, if you had kept the background layer safe, you can just make another copy and work on that. By the way, image retouching over the background layer is not actually a good idea.
Convert into a smart object (Photoshop Action Creation)
Now, we will rename the layer as Test 1. Well, you can rename the layer or not, doesn’t really matter. Then, we are converting the Test 1 layer into a smart object. To convert an image into a smart object, you need to go to Filters>Convert for smart filters. A dialogue box will open with the message, “To enable re-editable smart filters, the selected layer will be converted into a smart object”. Hit ‘OK’ to confirm.
Also, you can do the same by right-clicking on the layer and select ‘Convert to Smart Object’. The way you want to follow is completely your choice.
Adjustment layers (Photoshop Action Panel)
Next, we are adding a solid color adjustment layer in black and reduce the opacity to 50%. Also, we are changing the blend mode from normal to ‘Soft light’.
Now, we add a Brightness/Contrast adjustment layer and move the sliders a little bit. As we are doing these for test purposes of the action creation, we may not be super perfect. But, you make sure to use the best view of the action you want to make. By the way, everything we are doing is variable. So, you can change the values anytime you want.
Next, we add a ‘Levels’ adjustment layer and change the values a bit.
Color Lookup layer (Photoshop Action Creation)
At last, we add a ‘Color Lookup’ adjustment layer and change the 3DLUt File to ‘Fall colors. look’. The effect gives an image a warm outlook. You can have enough effects in the color lookup table. Choose according to your needs.
We stop recording at this point. Action creation is done now. We created the action under the ‘CW Actions’ folder. And, we can add more actions in that too.
Action Test (Photoshop Action Panel)
To test the action whether it works or not, we take another image. The image we use for testing the action is below. Now, we press the play button (see below image) to see whether it works or not.
As we press the play button from the Actions by selecting the action, the result is as below. So, the action is working properly. And, you do not need to play photoshop action step by step. You can also try creating an action following ours.
Example 2 (Photoshop Action Panel)
We are in the second example where we will tell in brief. I hope you have already got the points on how to create an action in Photoshop. You have heard of the ‘Frequency separation’ Photoshop action but how to make it. Here, we will give you the steps to follow along. I am pretty sure you can do that without any effort. So, let’s jump into it.
Open the Actions window. I will create a new action set named ‘Frequency Separation ’. In the set, we will create two Frequency Separation Action. One for 8bit images and another for 16bit images. Frequency Separation settings for 8bit and 16bit are different. So, we will show you both. Before you start recording be sure about the image bit. Go to Image>Mode and check for the bit selection. If the image is 8bit you will see the tick mark beside ‘8bits/Channel’. If the image is 16bit, you will see the tick mark beside ‘16bits/Channel’.
Create a new action, rename it FS – 8bit (for 8bit images) or FS – 16bit (for 16bit images), and hit ‘Record’.
The procedure (Photoshop Action Panel)
- Copy the background layer twice
- Rename the uppermost copy as ‘High Frequency’
- Rename the second layer as ‘Low Frequency’
- Select the ‘Low Frequency’ layer and hide other layers
- Go to Filter>Blur>Gaussian Blur
For the image, I am using 2 pixels Radius. Also, I am selecting the stop box beside the Gaussian Blur in the action panel. And, I am creating a stop above this with a message. “Do you want to adjust Gaussian Blur”? When you use the Photoshop Action Panel, you need to press ‘Continue’ to set the Radius in Gaussian Blur. The Radius it to vanish the texture of the image. And, you will have the colors only.
- Make visible the High-Frequency layer and select it. Go to Image>Apply Image. Set the Layer: Low Frequency, Blending: Subtract, Scale: 2, Offset: 128, and press OK. You will see the texture only without the color. You can use another option and that is ‘High-Pass’. For this tutorial, we will not go for that because that requires a lot of expertise and experience.
- Change the Blend mode Normal to ‘Linear Light’.
- Make a group of High Frequency and Low-Frequency layer. Rename the layer FS – 8bit. Stop recording.
- To make Frequency Separation 16bit, except one, all other activities are the same as 8bit. But, the settings for Apply image are different. Set the Layer: Low Frequency, Blending: Add, Scale: 2, Offset: 0, check the box ‘Invert’ and press OK. That’s it.
For your convenience, in the end, make a group of the High Frequency and Low-Frequency layers. Rename the layer FS – 16bit.
I have checked both the 8bit and 16bit actions on a different image and they worked perfectly. Make all the layers visible and hide the Frequency Separation group only. If you see there is no change, then the action you have created properly. If not, there must be some kind of mistake. Correct that and you are good to go. By the way, you can delete any step while creating an action. Press the Stop button and delete the step. Then press the record button again to continue action creation.
Things to remember
To use Photoshop Action Panel, you need to remember some matters to make it effective. Whatever action you make is not useful for all other images. Why? Because the things you did for one image may not apply to different types of images.
- If you take a new layer during action creation and draw something, you will have the layer. But, you will not have the drawing.
- If you add a mask and make some changes like Hue/Saturation adjustment, Curves adjustment, etc. you will have that. But, if you show/hide some areas in the mask, Photoshop will not record that.
- Photoshop will not save any editing during action creation. So, if you retouch or modify an image with the Brush tool, Blur tool, Clone tool, you will not have the modification.
That’s pretty much of it. I hope this helps to create an action. Use your creativity and do experiments with other steps that I could not cover up here. Do the steps with proper implementation and you will have the actions in your vault. The action set is very effective for a large number of images. If you handle one or two images for an action, that would be a loss of time.
How to create an action in Photoshop CC 2019?
To create an action in Photoshop CC2019, first, open the actions window. At the bottom, you will find the ‘Create new action’ button. Click on that, name the action and click on ‘Record’. Photoshop will record everything you do. Hit stop when you complete the steps.
How to use actions in Photoshop?
To use an action in Photoshop, open the Actions window, select the action you need, and hit the Play button. That’s it.
How to save an action in Photoshop?
To save action in Photoshop, you do not need to save it separately. Record the steps and the action is saved automatically. But, if you want to save the action in your hard drive, go to the grid on the upper right portion. Click on that and select the ‘Save Actions’ option, select the location and save.
How to play an action in photoshop?
Open the action window, select the action you need, and hit the play button. If you do not have the action in your actions set, go to the grid on the top right of the window first. Click on that and select load action. Locate the action set from your storage and load. When you see the action in your vault, hit the play button.
How Photoshop actions can help in image editing?
Handling an image with the same settings is more time-consuming. You do not want to make the same settings for each image in that case, do you? For this kind of situation, you can create an action to minimize your labor. Load an image, play the action and you are halfway done. The rest you may need to do manually depending on the editing you require.